Repairs & Modifications

[NorthernVictory]

OK, so I wasn't sure where to post this since it seemed kinda off topic. Since it's this pair of jeans this is logically a relevant place to ask.

So it seems that a little bit of the inseam overlock stitch is coming loose, on the left leg, on some localized spots. So it's not a big deal but I've actually never had this happen before, but anyway, maybe it is and you guys can correct me in that case.

I send these same pics to a shop kinda close asking for their opinion, and they said (without actually having the denim in person, mind) they will need to take apart the hem, take apart the inseam and use a darning machine?

Excuse my ignorance but it would appear from some research that a simple overlock stitching machine should be able to get the job done…

I was also going to have these guys hem my two other pairs of jeans but I'm pretty paranoid after a previous alteration went south and I'm automatically suspicious after they wanted to take the whole bottom apart.

[jdl1279]

Certainly no expert, but my 666XHS are doing the same around my cuffs and inside where my boots rub. So would assume this is a fairly common occurrence, but would love others take on it as well.

[NorthernVictory]

@jdl1279:

Certainly no expert, but my 666XHS are doing the same around my cuffs and inside where my boots rub. So would assume this is a fairly common occurrence, but would love others take on it as well.

Right. My most immediate question would be is there any negatives to just leaving this as-is?

[jdl1279]

I assume eventually you'll wear through if it continues to fray, but mine have been like so for months and with daily wear haven't progressed too much

[JCMx800]

Fix it by yourself, it just cost some minutes of your life

[4c]

+1 It's a super easy fix.

[jdl1279]

What did you use there 4c? You guys got me feeling like I'm slacking on maintenance.

[4c]

Thick cotton (embroidery?) thread from my local crafty store to repair the seam wrap and warp fibers from the large denim tag on the BB’s to repair the fraying cuff.

[jdl1279]

Hmmm…will have to see what I can find as extra warp I don't have. Of course I expect this to be an ongoing problem anyway....

[Giles]

For the seam wrap (or just about any repair to constructional stitching) I would try and get what is known as 36's Polycore.  It is monster tough and very similar to what we use for our constructional stitching thread.  We get ours from here…

http://www.empressmills.co.uk/acatalog/36s_Polycore.html

[jdl1279]

Thanks G, have three sewing/craft stores local to check for this and makeshift warp thread.

[Simon H]

Hi guys,

I want to get some of my 501xx 's repaired.

I am aware of Dale in Covent Garden who i have found to be excellent but
i just wanted to check with you guys that i am not missing any other options.

Thanks

Simon

[nemesisnow1200]

The Denim Doctor in Manchester,,had a few pairs altered/fixed by the guy,,,damn good,,oops sorry you are only interested in London based fixer uppers

[Simon H]

Thanks mate.

There is just something nerve wracking about putting 5 pairs of irreplaceable jeans into the post.

[fre-co]

Apparently the Edwin store do repairs too. I was thinking of trying them out.

[Chruschtschow]

@Giles:

Pocket bag repair Padmore styley….

My 666 made it on the forum!
Thanks for that chambray patch. I also like the Eye of Sauron painted in denim IH Japan gave me.

[pillowPANTS]

Where in Canada or Us should i send my 666XHS to have a crotch blow out takin care of? I know that Self Edge does repairs but do they do a good job?
I need the blow out takin care of, pocket bag fixed and my 666D hemmed.
Where should i send em?

[hajduk]

SE makes fantastic job. Believe me. They can do anything and very very well done.

Sent from my iPhone using Tapatalk

[pillowPANTS]

Which SE do you have experience with @hajduk

[hajduk]

All of them these last years. LA, NY and Portland recently. No difference. Working there true artisan. Impressive.

Sent from my iPhone using Tapatalk