IHJ-49 - Split Steer Modified Type III Jacket - Black or Brown
-
I know I certainly have a Pair of Lace Up Boots in Roughout and Engineers in Roughout that have been wet right through on a few occasions and they always brush up as good as new after being allowed to dry naturally at room temperature.
I'm between sizes in Iron Heart Westerns. Standard Indigos normally Large and OD's normally XL. A mix of both sizes in UHF's, Large in Kersey and XL in Serge.
Defo think the Steer would be better to try in the Large allbeit the Chest looks a little neat. The Dimensions of the sleeves along with the waist and opening is putting me off the XL in comparison to my 14 oz OD type lll in XL.Anyone had the opportunity to try on both the L and XL in the Steer before!?
-
@M800sct1 I'm a large in every IH shirt I own (quite a few of them at this point)
I have this jacket in a size Large as well. I love the fit because I can easily and comfortably layer it over a UHF and have excellent range of motion still.I could size down to a medium if I wanted a trimmer fit over a tee shirt only...but I wanted to be able to wear it over a flannel or other IH shirt so large was the way for me...
I did have the sleeves shortened on mine due to the arm length being quite long.
WTB
IHSH 301 large -
Thanks Guys for your comments and insights and apologies for my late reply however was away on a Course with strictly limited access to the modern World for a week or so.
Still undecided from the comments what size to ultimately go for on this Jacket. Want it to fit over a Denim Shirt or UHF mainly, but still to be OK when worn just over a T occasionally. As my shirts are a mix of L and XL the sensible decision may be the XL but still worried its goin to feel too roomy and hangy in the main. Graham what size are you on this Jacket I'm normally similar to you and Olly in general, though a little smaller on some shirts than you sometimes wear. Cheers. Mark -
Thanks for that Graham. The sleeves were just scaring me a bit on the XL whilst everything else seams reasonable.
How is the sleeves on you, and if I needed to shorten, who could you suggest I use to do this in the Uk and that you know would make a professional job of it. Also the likely cost of this to factor in.
With Thanks.
Mark -
What I like about the sleeves is that the cuff is quite narrow so they sit at the wrist bone and you get some great bunching at the elbow ditch rather than them hanging over your hands.
Personally have no recommendation re shortening but hopefully, there is an owner in here that has done that and can chime in.
-
Cheers Graham.
-
@Mizmazzle said in IHJ-49 - Split Steer Modified Type III Jacket - Black or Brown:
Just dropped off my jacket to the local furrier. This guy has been around forever in my town. As soon as I set it on his table he was like, “wow, this is split cow! This is really heavy and will last the rest of your life!” He was impressed with the jacket.
He’s going to take 1.75” off the cuff end and maintain the length of the side cuff split. Feel a lot better about approaching it this way versus altering from the shoulder.
Get it back next week…stay tuned.
I mean….
@tody he took off 1.75”…which is nuts. The sleeves still look just a tad long in the pics, but once I lift my arm just a little they come up quickly. Driving etc. they are well above the wrist. So the length functions perfectly.
@ARNC that’s a great question about the scraps. I was kind of thinking about doing some water tests on at least one scrap. See how the split steer holds up to rain and sun etc. Do you have any other ideas?
-
Thanks Guys.
Against some sound constructive advice, think I'm goin to try the smaller Large Size first as pretty uncomfortable entrusting someone in my vicinity to make a Professional job of shortening the sleeves on the XL.
It may work for me as I very seldom ever fasten a type3 Denim Jacket and this may be be similar.
Cheers.
Mark -
@M800sct1 yeah man. I had the sleeves shortened. It was really easy and came out great. Can’t tell they were altered at all. It cost me about $70 if I recall. I took it to a furrier to have it done.
I detailed the whole experience pretty thoroughly in this thread. If you go back not too far you can read all about it.
-
Thankyou Miizmazzle.
Looked back on the thread and saw your postings and comments.
Goin to try the smaller Large as opposed to the XL first I think.
If the other measurements work for me in the Large I may not require to get the sleeves altered whereas the XL would definitely need them altered.
I'm not convinced that I would be able to find someone locally that would make a decent job of shortening the sleeves for me.
Thanks Again.
Mark -
@M800sct1 It's one hell of a jacket. Hope you get it all sorted. Let me know if I can help with anything specific.
I was able to get mine sized so that it works great as both a layering piece as well as just over a tee (though it is a bit oversized with just a tee but totally doable still) -
@Mizmazzle said in IHJ-49 - Split Steer Modified Type III Jacket - Black or Brown:
This jacket is the shit!!
Wow that look is awesome!
BTW, what boots are those? They are perfectly in place with the rugged but refined feel. -
@Mizmazzle What is your typical sleeve length?
I wear a L in virtually all of my IH shirts, so I'm thinking I want a L in this jacket. The sleeve length is pretty crazy, though. I have kinda long arms, so maybe the L will work. Even the Medium has a long sleeve length, but for me, a little too long is better than a sleeve that rides up when you reach across a table. Thanks!
-
@singletrack Hey man. My prefered sleeve length is 25.5 give or take...
The sleeves on my split steer were really long, and you're right, they are long across all sizes on this jacket. I had my sleeves shortened because they were just way too long for my preference. After I had them altered, the jacket was absolute perfection. -
@Mizmazzle Well, I'm about where you are. 25-26" (or 34" in a dress shirt) is my general sleeve length. I'll have to think on this one and see if we have someone local that I would trust to alter. Thanks for the quick reply!
