IHSH-299-PUR - Ultra Heavy Flannel Work Shirt - Classic Check - Purple

[waXology]

Perfect! I want it too.. I love flannels when they looked washed out and used!

I have some old Flat Head ones that are like 8-10 years old that are looking nicely 'used' so can't wait for this to get worn and faded

Cannot wait

[Snowy]

@Filthy:

Top one was washed and worn countless times. Bottom was washed twice and only worn like 25 or less times.

I actually thought it was the other way around - they both look really good 

[Roadfox]

Anyone else having sizing issues? Mine arrived today and it’s not fitting like all my other IH XL work shirts. I measured and it’s def coming up short compared to the measurements that were listed.

[Filthy2123ozjunkie]

It doesn't appear to being laying completely flat where you are measuring. It would be almost an inch wider of yourolled the back part behind the seam out. Look at the area to the left and to the right of the pockets.

[Roadfox]

It’s flat, if anything I stretched it out at the pits for measuring. It’s also much more snug around the pits and shoulder area than any previous work shirt.

[neph93]

@Roadfox:

It’s flat, if anything I stretched it out at the pits for measuring. It’s also much more snug around the pits and shoulder area than any previous work shirt.

@Filthy is referring to the circled areas. If you folded out where the side seam is tucked in towards the pit you’d get a different measurement.

I haven’t heard anyone else mention sizing issues at all, but take it up with the retailer you bought it from.

[Roadfox]

Is this better?

[neph93]

Looks about right. But you’ll find a definitive guide on how to measure the way they use to produce the website tables on the product page for this shirt on the Iron Heart website.

If it comes up smaller than the tables when you measure like that, then you may have a rogue shirt that has sewn up that way.

[J-IV]

Time to party!! [emoji41]

Sent from my SM-N960U using Tapatalk

[Roadfox]

Yep, fits and measures like an L rather than an XL. Either cut/sewn wrong or mistagged.

[neph93]

@Roadfox:

Yep, fits and measures like an L rather than an XL. Either cut/sewn wrong or mistagged.

It is very rare, but not unheard of. I would strongly encourage you to get in touch with the retailer you bought it from, whether that is the brand website or another outlet.

[neph93]

@J-IV:

Time to party!!

It is Friday after all! Mine should be arriving today too.

[jerkules]

I just want to briefly express my love for this shirt. That is all.

[budpatch]

^^^^ I second this

[neph93]

@jerkules:

I just want to briefly express my love for this shirt. That is all.

@budpatch:

^^^^ I second this

It is truly a thing of beauty. Mine arrived today. First wear day tomorrow with some FIT PICS to come.

@Roadfox what is the sitrep with yours. I’m afraid to say mine was an XL and meets the published dims.

[Pufton]

I scored an XXL.
I asked for the smallest pit to pit and the crew sent me 23.6.
Slightly smaller than the published figures but definitely not wrong sized.

It’s certainly IS a thing of beauty.

I’ll post some more photos next week because it’s going on holiday with me.
Out of the UK.

[Dans]

@neph93:

Looks about right. But you’ll find a definitive guide on how to measure the way they use to produce the website tables on the product page for this shirt on the Iron Heart website.

If it comes up smaller than the tables when you measure like that, then you may have a rogue shirt that has sewn up that way.

…harrumph. For the one in question…We should also keep in mind that these are UHF. So 23” or close on the outer feels tighter than a thinner shirt that has 23” dims. And sorry for the one in question, but my xl too is right on.

Pull that shirt out and tight and flat and I bet it’s close/right on. I’ve discussed with ih before (on a pair of 888s I had issue with) and it sounds like they do/often check outgoing as well.

I hope this worked out for all and if not, someone will love it from ya!

[J-IV]

Damn we got a bit of a hot spell out here so won't be able to baptize the Schlurple this weekend[emoji29]

Ya'll looking good though. The weight isn't as heavy as I anticipated which seems perfect for Cali weather year round

Sent from my SM-N960U using Tapatalk

[neph93]

@Dans:

…harrumph.

Well said on all your points

@J-IV:

Damn we got a bit of a hot spell out here so won't be able to baptize the Schlurple this weekend…

Not an issue I have to worry about…. Apologies for the smug smirk everyone, this shirt makes it hard to wipe it off my face.

[dinobarnesberlin]

Purple agrees with you @neph93 … smirks=happiness !