Posts made by theofficialhung

Interesting, thanks for the info! So just mail the shirt in to IHUK and pay postage to have it mailed back to me? Maybe one of the IH staff can confirm @Giles @Alex

I purchased one of these shirts secondhand, brand new with tags the black snaps version. How do I get the copper snaps upgrade?

Thanks guys - I've always been interested in custom but I already have multiple Wescos and feel like I've sunk enough money into trial/error that I don't want to pay the extra $100 for custom. This is probably very illogical haha.

For example, my 8.5E unstructured Wesco 7500s fit me but I just got a pair of Mr. Lou's black wax flesh in 9.5E that are very slightly roomy but also fit (same last MP1339).

Looking to get either a Morrison (91W last I think) or Boss (9165 or 9109) for my next build. I am very likely a 9 or 9.5 in the Boss, does anybody know if the Boss D width = the Mr. Lou (MP1339) E width? I've heard the MP last's E width is like a standard D and it fits me well so I would get a 9.5D Boss if that's the case.

Here's a pic of the Mr. Lou's to contribute to the thread instead of just my questions.

@Mizmazzle:

Thanks @Oaktavia its a custom Morrison configuration. So simple but so robust.

May I ask how you sized them? I'm interested in the western toe but it looks narrow my brannock is 10D/E and I heard you're supposed to go 0.5 down but I'm not sure about the width.

@Mlwdp:

What kind of black leather is this? Domaine, oil tan or horse? I'm trying to order black engineers before the wait time gets too long (12-14 months is already crazy).

These are the Wesco Warrens I got off eBay. Freshly saddle soaped and applied VSC conditioner, I'm pretty sure they're burgundy domain leather (more red in person than I thought). My Hendriks in size 9E are slightly too big but fit well, these Warrens are size 8.5D and are slightly too small I have to remove the leather insoles for a better fit. Not sure if I should size up my MTO order of Boss Engineers in size 8.5D, I think they're built on the same last as these Warrens.

I just purchased these pretty good condition Wescos for under $300 shipped so a good deal for me. https://www.ebay.com/itm/402873862370

They weren't worn much based on the wear to the sole. I'm guessing they are a 6 or 7 inch Warren? The seller says they're burgundy but he lost the box. But they don't really have the pop of burgundy domain although it could be the lighting, anyone have any guesses?

@neph93:

Early morning delivery…

Amazing build the single row brown welt stitch is a great touch. I have almost the exact same version but as a Whites Bounty Hunter 7" distressed rough out on honey vibram with brass hardware (arriving in June).

Are your Boss's built with the bump toe? I'm guessing not but I can't tell.

@goosehd appreciate the quick reply. It must be trick of the camera because the shaft of your boots don't look bulky at all. Lining isn't an option for me unfortunately since I live in California where it gets pretty warm.

I was told that shorter engineers like the 7" ones from Japan and even 8" versions have a tendency to "flop around" and wear loose around the ankle. Taller boots supposedly don't have this effect quite as much since they fasten up higher around the leg. Do you notice this effect when wearing your shorter 8" vs taller 9"? Would it be possible to fasten the buckle tight so it grips your calf/leg and the shaft doesn't flop around loose?

Thanks for answering my questions, I've never owned engineers before (but have plenty of regular lace up boots) so not quite sure what to expect.

@goosehd:

Arrived yesterday:

Build Specs:

Custom Fit Boss
+Single-Tone:Roughout Charcoal
  +8" Height
  +Black Leather Lining
  +#100F Vibram Sole
  +Do Not Ink Soles and Heels
  +Standard Heel Height
  +One Top Strap (standard)
  +Standard Length
  +Gun Metal Roller Top Buckles
  +Buckled Instep Straps
  +1" Longer Instep Strap
  +Gun Metal Roller Instep Buckles
  +Lightweight Sterling Upper Stitching
  +White Outsole Stitching
  +Black Leather Insert

I know this post is a couple of months old but I was wondering if these boots were made with a narrow shaft/leg? Also, what are your thoughts on the length of the boot at 8 inches? Do you like how the boot wears or would you like it to be longer?

I'm asking because I just put in my order for an 8" Boss in Charcoal Smooth on Raptor wedge sole, kind of similar to these ones. However, I was just informed that Wesco measures the shaft from the ground up. This means that an 8" Wesco boot will really have a 7" shaft and therefore wear like a 7" boot not 8". Also, in theory the engineer boot's shaft will collapse and break in as you wear it so what was originally an 8" boot (truly 7") should end up like a 6.5" or 6" boot. This might not apply to you since you got yours lined and mine are not.

If you or anyone on this forum can confirm what I'm saying is true, I will probably change my order to a 9" boot instead. Thanks.

@neph93:

@theofficialhung:

Does the 555 sit at the waist and wear similar to the 634?

Can anyone suggest other cuts with a top block similar to the 888 only with a more narrow leg?

The 555 top block is higher than the 634, lower than the 888. But the 888 and 555 have very different top blocks. The 555 is quite roomy. The waistband is much bigger compared to tag size than with the 888. For example, a w34 888 will often be 33.5”, whereas a w34 555 might be 35”.

This is exactly the kind of feedback I was looking for, thank you. I'm a true waist size 33 inches and wear a tag size 33 in the 888, so I'm either a 31 or a 32 in the 555 but I'll probably go with 32 to be on the safe side. But based on the measurement chart, a 888 size 33 has nearly 2 more inches of front rise than a 555 size 32 which gives me pause…

Hi guys, the IH 888 cut is one of my favorite cuts in my closet but I would like something with the same high rise but a more narrow leg.

Does the 555 sit at the waist and wear similar to the 634? I found the 634 to be too low rise for my liking, kept rubbing up on my crotch and wasn't comfortable for me to wear. The 888 gives me plenty of room and the rise I think makes a world of difference.

I want to give the 555 a try but don't want to waste my time/money if the rise isn't going to work out for me. Can anyone suggest other cuts with a top block similar to the 888 only with a more narrow leg?