Watches - another OCD problem
-
@Giles has been looking at getting a Grand Seiko SBGA231 Spring Drive Diver's Watch, which is a pretty cool piece.
However, they also make a mechanical diver's watch, the SBGH255. Time and Tide say it's intimidating!
It's also available in a limited edition with a blue dial.
It's a big beast, with a 47 mm diameter case, the Spring Drive Diver's is 44 mm. The movement is a high-beat (5 Hz) model, which should be pretty accurate. It's also water resistant to 600 m, and anti-magnetic.
I haven't seen one in the flesh, but I like it for it's over the top nature. Then again, I like the Ploprof, so my tastes are distinctly suspect! The Spring Drive model will be more wearable, though.
There are more details at aBlogToWatch and Monochrome Watches.
-
I've seen this before, too intimidating for me…..
Your 21 zuan is great. That’s in my list for my next watch purchase.
-
I fell into the "I gotta have one of each type" mindset. Started with divers, then into chronos, then into diving chronos…then appreciated the simplicity of a field watch...and the durability of a G-Shock...wound up selling off a bunch of stuff because I always wind up wearing either my Omega SMPc (I have both the black and the blue) or G-Shock GW-6900.
I've noticed this a lot with the various things I'm into. With IH, I always go back to the 634S, with knives it's always back to the Victorinox Tinker, with pistols it's always back to Glock.
-
I've seen this before, too intimidating for me…..
Your 21 zuan is great. That’s in my list for my next watch purchase.
It was/is not mine….I stole it for a few minutes from one of our Chinese customers.....I would like one though. But I will likely only buy one if I can go to the factory and be a bzillion percent sure it's the real deal....
-
I've seen this before, too intimidating for me…..
Would posting it in the other watch thread be a banning offence?
-
I posed a couple of skull watches in the other watch thread, and thought that I'd put these up as the Ying to their Yang.
They're designed by a Scottish artist, Fiona Kruger, and made in limited editions.
This is the Celebration Skull.
And this is the Petit Skull.
There's also the oh-so-cool Vanitas Wall Clock, which opens its mouth as the power reserve runs down!
-
and back to regular program…
-
@JDelage is after a bronze watch, and Oris have just announced the Carl Brashear Chronograph.
It's a limited edition of 2000, and Hodinkee are reporting that it'll cost $4,950.
The downside that I can see is that the Tudor Black Bay Chronograph is the same price, has a similar look, and has a modified version of Breitling's chronograph movement. It's steel, not bronze, though I wouldn't be surprised if a version in that metal comes along. Hodinkee have a review, if you want more information.
(I'm hoping they drop that movement into the Heritage Chrono soon.)
Lastly there's the (deep breath) Zenith Heritage Pilot Extra Special Chronograph, which has the El Primero 5 Hz movement.
It's around $7K, which is a bit more than the Oris and Tudor, but cheaper than the other El Primero watches in Zenith's collection. There's a review on aBlogToWatch.
Zenith also offer the Pilot Type 20 Extra Special, which is a non-chronograph piece, but I think that it's a similar price to the chronograph.
-
I have my bronze watch - I bought a 2nd hand Evant Tropic Diver. (The Oris is nice but I like their non chrono bronze Carl Brashear better.)
I'm now toying with the idea of (1) a 116610LV sub' (which would be a stretch for me but it's been a grail for 20+ years) and (2) a dedicated sub-$1,500 diver (which I should take to the "other" thread.)
-
I note that the screws are not timed. Big no-no.
[/quote]Actually getting screws to line up is really, really difficult. There's a piece at Salon QP that explains it, but basically it'd be a really difficult engineering task to achieve.
Hodinkee have a piece introducing the Ressence Type 2 e-Crown Concept today. The big news here is that the watch's time can be set from an app.
This is only a concept, but a production version is coming. Let's hope that they don't only support the app on the iPhone when it arrives.
-
Yes it's hard but it can be done and it makes a huge difference on pricy watches. I always notice how the screws are well timed on Royal Oaks.
The Royal Oak cheats! Time and Tide point out that the screwheads on the bezel are actually threaded nuts in hexagonal holes.
The screws are then inserted and tightened from the rear, where the heads aren't aligned.
My suspicion is that the screws aren't aligned on watches because the sizes and tolerances are a lot smaller. Given the cost of a high-end Patek, I'm sure that an owner could justify an extra few hundred or thousand dollars for a watchmaker to put the time in if it was easy.
-
It's SIHH, one of the two big watch fairs, next week, and we're starting to see launches. Monochrome Watches have announced the Baume & Mercier Clifton Baumatic, which is their first model to use their proprietary movement.
I like the specs on this: It's chronometer (COSC) rated, has a five day power reserve, is antimagnetic to 1500 Gauss, and has service intervals in excess of five years. The price is a pretty reasonable CHF 2450,
about $2500$2790 according to Hodinkee.
