IH-888S-UHR - 21/23oz Ultra Heavy Raw Selvedge Denim High Rise Tapered Cut Jeans
-
@StiffLeg there is no exact math.. how hot did you washed them? For example i washed them on 30 celcius the first time and again for the second time and a got a little extra shrinkage on the inseam at the second wash. Didn’t you as well @Daniel-San
-
@StiffLeg
I would definitely wash them in the machine with 40 degrees if you want to hem.
I first washed with 30 degrees and and had a little less than 1“ shrinkage. second wash 40 degrees and inseam shrink was another 1“ ! -
Back from vacation and back in my UHRs. This is the first time putting them on after having washed them right before I left to Indonesia.
Some notes:
Fabric feels as stiff as when I picked them up in Gosport + has a certain „crisp“ to it it didn’t have before. Love it!
The top button is just as difficult to close as when I tried them on raw. So that’s proof of what everyone was suggesting: Worn and washed waist ends up the same as raw.
The whole silhouette tightened up a bit in „no stress areas“ (butt, thighs, leg) and feels more adapted to my body than before.
@Daniel-San The leg did shrink a considerable bit but I can’t quantify (no measurements taken). Luckily I always unfold my cuffs when not wearing my jeans so there’s no visible „off“ cuff mark.
-
-
@Heavy_blue @Daniel-San Just checked my washing machine manual. I used a typical warm wash which is in the range of 29-40C.
Good to know. At 35" I'd be looking to do a hem, but if it were to shrink more and closer to 34" I might be good to cuff forever (2" double cuff makes a 30" inseam). The inseam as it is right now is a little unwieldy, particularly at this thickness. But such is the raw life!
-
@StiffLeg said in IH-888S-UHR - 21/23oz Ultra Heavy Raw Selvedge Denim High Rise Tapered Cut Jeans:
What should I do about this?
If it was me, I would turn them the right side out, put them on and forget about it
-
-
Yay, temps are dropping and these beauts will be back on my legs.
-
I picked up a pair from mild blend. Looking forward to getting these going this fall/winter.
-
-
@Daniel-San I almost bought one last week then I decided my jack is the same exact mechanism and so far have found it to be way easier than o thought to use for this purpose.
-
So far so good. The waist is taking forever to dry so I out it outside. The New Mexico sun should take care of it. It’s stretched to 16” across with about 2” on each side. Think that should get me somewhere I between 32” and 34” which is where I want to be. I’ll keep y’all posted.
-
Hey Everyone!
Wondering what the chances are that I could get away with just a couple hot soaks prior to wearing these?
Reason is, I only have access to a top loader washing machine, and in my experience, anytime I wash my denim in a top loader, I get some marbling - even if I turn the spin off, wash cold, etc.
Anyone have experience with just soaking these guys? Or maybe a top loader wash on delicate with no spin on a new pair wont cause marbling?
Thanks in advance for any and all input!
