Random questions to which you seek an answer
-
-
@CosmoSix5 said in Random questions to which you seek an answer:
Last fall I bought a pair of 777's size 38. They fit snug as they should, however after a few wears around the house my wife and I had the same opinion. The rise on them was sawing me in half visually. For the record I'm 6'5" 195cm and 230lbs/104kg
I'm all about showing off my boots so a small hem is important. Considering 555 and 666 as slim fit is my favorite. I'm currently wearing a pair of PBJ 019 that fit and look good but not slim enough. I'm afraid the 888 would be very close to the 019(relaxed taper). I've got several IH shirts that are great and a type 3 jacket. Time for some jeans I can keep...
I didn't lose a ton selling the first pair but it was still a bummer. I have to have them hemmed(34) because nobody near me can do it right. This the no return issue.If you like the fit of the 777 aside from the rise, then the 555 is the logical next step, similar-ish fit through the legs, but much higher rise.
-
@CosmoSix5 said in Random questions to which you seek an answer:
Very off putting to see real questions buried to no man's land. Not sure what other purpose a.forum provides other than answering questions...
Sorry you feel that way, but this thread is not 'no mans land' it is a thread dedicated to answering questions like yours, which I have just done.
-
@wildeep said in Random questions to which you seek an answer:
888 Fit Guidance
So my question is this. If 888 14oz fits me well in 32 after wearing them in, can I expect something similar with the heavier weight 888s? I am keen to get some 21oz but want to know if w32 will also be the right fit for me in the heavyweight as I wonder if there’s a bit less give/stretch?
Generally speaking, yes. They are cut to the same pattern. There will be some variance model to model, which is why we publish a specific chart for every model of jeans/shirt etc etc. Did you buy the IH-888S-142 from us directly? If so, we should have a note of the actual waist size of them when new and can work out sizing on other models from that. If not, you'd need to measure your pair now, and we can work out how to go backwards from there..
-
@CosmoSix5 said in Random questions to which you seek an answer:
Very off putting
you get every service you could demand, no reason for wailing
-
@endo amen on that!
-
He’s new let’s get him used to what a real denim bromance forum looks like
-
@Matt said in Random questions to which you seek an answer:
A no man’s land with 17,000 posts?
But only 2.7 million views....
-
@CosmoSix5 you‘re welcome to join us, it‘s a very friendly family dealing with all kinds of topics, people from all over the world. Trust on being treated good, it‘s different to other places in the web. Ask and you‘ll be helped, post and we‘ll appreciate your participation.
-
Right! You can even ask Giles about male nipples =). This is a cool place!
-
@Tago-Mago said in Random questions to which you seek an answer:
Following on from @T4920 asking for a wabash type 3 - if full denim is a Canadian tuxedo, what would/should full wabash be called?
Beats me...
-
@Tago-Mago use your new mod powers to influence the powers that be to bleach some dotted lines all over a nice t shirt? Then we wouldn't have an issue
This actually just reminded me of a new product Giles told me was in the pipeline in Hamburg last year... I think you might have been there at the time too...
I'll keep quiet, but hopefully it is part of the FW collection!
-
An actual question, before the conversation drifts...
Would the crew 'hem' the sleeves of a long sleeved shirt, to the typical short sleeved length for a customer?
Need to pick up a summer shirt, and the 10oz work shirt with tonal stitching that's sitting in the outlet is calling me..
“𝑁𝑒𝑣𝑒𝑟 𝑙𝑒𝑡 𝑡ℎ𝑒 𝑓𝑢𝑡𝑢𝑟𝑒 𝑑𝑖𝑠𝑡𝑢𝑟𝑏 𝑦𝑜𝑢. 𝑌𝑜𝑢 𝑤𝑖𝑙𝑙 𝑚𝑒𝑒𝑡 𝑖𝑡, 𝑖𝑓 𝑦𝑜𝑢 ℎ𝑎𝑣𝑒 𝑡𝑜, 𝑤𝑖𝑡ℎ 𝑡ℎ𝑒 𝑠𝑎𝑚𝑒 𝑤𝑒𝑎𝑝𝑜𝑛𝑠 𝑜𝑓 𝑟𝑒𝑎𝑠𝑜𝑛 𝑤ℎ𝑖𝑐ℎ 𝑡𝑜𝑑𝑎𝑦 𝑎𝑟𝑚 𝑦𝑜𝑢 𝑎𝑔𝑎𝑖𝑛𝑠𝑡 𝑡ℎ𝑒 𝑝𝑟𝑒𝑠𝑒𝑛𝑡.”
-
@Tago-Mago @T4920 a Swearingen tuxedo?
-
@T4920 said in Random questions to which you seek an answer:
An actual question, before the conversation drifts...
Would the crew 'hem' the sleeves of a long sleeved shirt, to the typical short sleeved length for a customer?
Need to pick up a summer shirt, and the 10oz work shirt with tonal stitching that's sitting in the outlet is calling me..
GREAT QUESTION T4920!
. Although I’ll have to deduct points for the t-shirt
