Random questions to which you seek an answer
-
@wildeep said in Random questions to which you seek an answer:
888 Fit Guidance
So my question is this. If 888 14oz fits me well in 32 after wearing them in, can I expect something similar with the heavier weight 888s? I am keen to get some 21oz but want to know if w32 will also be the right fit for me in the heavyweight as I wonder if there’s a bit less give/stretch?
Generally speaking, yes. They are cut to the same pattern. There will be some variance model to model, which is why we publish a specific chart for every model of jeans/shirt etc etc. Did you buy the IH-888S-142 from us directly? If so, we should have a note of the actual waist size of them when new and can work out sizing on other models from that. If not, you'd need to measure your pair now, and we can work out how to go backwards from there..
-
@CosmoSix5 said in Random questions to which you seek an answer:
Very off putting
you get every service you could demand, no reason for wailing
-
@endo amen on that!
-
He’s new let’s get him used to what a real denim bromance forum looks like
-
@Matt said in Random questions to which you seek an answer:
A no man’s land with 17,000 posts?
But only 2.7 million views....
-
@CosmoSix5 you‘re welcome to join us, it‘s a very friendly family dealing with all kinds of topics, people from all over the world. Trust on being treated good, it‘s different to other places in the web. Ask and you‘ll be helped, post and we‘ll appreciate your participation.
-
Right! You can even ask Giles about male nipples =). This is a cool place!
-
@Tago-Mago said in Random questions to which you seek an answer:
Following on from @T4920 asking for a wabash type 3 - if full denim is a Canadian tuxedo, what would/should full wabash be called?
Beats me...
-
@Tago-Mago use your new mod powers to influence the powers that be to bleach some dotted lines all over a nice t shirt? Then we wouldn't have an issue
This actually just reminded me of a new product Giles told me was in the pipeline in Hamburg last year... I think you might have been there at the time too...
I'll keep quiet, but hopefully it is part of the FW collection!
-
An actual question, before the conversation drifts...
Would the crew 'hem' the sleeves of a long sleeved shirt, to the typical short sleeved length for a customer?
Need to pick up a summer shirt, and the 10oz work shirt with tonal stitching that's sitting in the outlet is calling me..
“𝑁𝑒𝑣𝑒𝑟 𝑙𝑒𝑡 𝑡ℎ𝑒 𝑓𝑢𝑡𝑢𝑟𝑒 𝑑𝑖𝑠𝑡𝑢𝑟𝑏 𝑦𝑜𝑢. 𝑌𝑜𝑢 𝑤𝑖𝑙𝑙 𝑚𝑒𝑒𝑡 𝑖𝑡, 𝑖𝑓 𝑦𝑜𝑢 ℎ𝑎𝑣𝑒 𝑡𝑜, 𝑤𝑖𝑡ℎ 𝑡ℎ𝑒 𝑠𝑎𝑚𝑒 𝑤𝑒𝑎𝑝𝑜𝑛𝑠 𝑜𝑓 𝑟𝑒𝑎𝑠𝑜𝑛 𝑤ℎ𝑖𝑐ℎ 𝑡𝑜𝑑𝑎𝑦 𝑎𝑟𝑚 𝑦𝑜𝑢 𝑎𝑔𝑎𝑖𝑛𝑠𝑡 𝑡ℎ𝑒 𝑝𝑟𝑒𝑠𝑒𝑛𝑡.”
-
@Tago-Mago @T4920 a Swearingen tuxedo?
-
@T4920 said in Random questions to which you seek an answer:
An actual question, before the conversation drifts...
Would the crew 'hem' the sleeves of a long sleeved shirt, to the typical short sleeved length for a customer?
Need to pick up a summer shirt, and the 10oz work shirt with tonal stitching that's sitting in the outlet is calling me..
GREAT QUESTION T4920!
-
@T4920 It's not something we've done before. We're not really setup for full blown garment altering in all honesty. We have the means to shorten bottoms of course but I think once you go down altering sleeves, it becomes a much bigger job
-
@AdamJ that's understandable, I'd never ask for minor sleeve/cuff length alterations as that's obviously a specialist job for a tailor.
Just thought LS to SS conversion might have been possible as (in my mind at least) it seems like the same process as hemming a pair of trousers, and I doubt it'd be a common request.
You can blame @Kasi for inspiring me with his recent SS denim shirt conversion
. Although I’ll have to deduct points for the t-shirt
