We know you love IH, but where do you think we can improve?
-
It would be nice to see some more length in the body of the UHF’s for us tall folks with long torsos. I’m 6’4 and 190 pounds and pretty much have to buy XXL in UHF’s to get enough length in the body so I don’t look like a belly dancer. Because of this, they don’t fit me that well because the chest is huge and the arms are crazy long even at my height. Extra length would help me avoid having to size up. T shirts are the same too, too short even in the long sizing.
I also agree with the previous poster that it would be nice to see some more competitive products in leather. I’m pretty sure he also bought Y’2 for similar reasons to me, better leather selection and better cuts with a more modern aesthetic. TJ gets a lot of business because Y’2 and Double Helix offer so many cool products and have good cuts that fit a range of people. The deer stuff is cool but it would be nice to see some more variety in leathers and cuts. Not complaining, I just see this as something Iron Heart is missing out on product wise.
Lastly, it would be cool to see some waxed products! Ship John absolutely kills it with waxed jackets, I’d love to see a Japanese take on this.
These are all more wishes than anything. Basically a dream list of things I’d love to buy.
-
This may have already been covered, (without scrolling back through the thread), and bear in mind this is only a minor nitpick….
I’d like to see larger interior pockets on the jackets.
This year I bought the winter parka and the oiled N1. I really enjoy both jackets and have worn them a ton already. Solidly built, warm, stylish, functional. The interior chest pocket on both is too small.
On the winter parka my iPhone fits, but it stands about 1/2” above the pocket so I can’t use the Velcro closure. I tend to use one of the outside chest pockets because of this, but would prefer to use the inside pocket to keep it warmer.
On the N1 my phone will fit if I slide it in sideways and carefully feed it down to the bottom of the pocket … it’s a tight fit.
My wallet won’t fit either.
Again, more of a small nuisance and take this as constructive feedback. I love both jackets!
-
Love my work shirts, but the buttons on all of them frequently slip out and are a bit small to fumble with on the heavier fabrics. I like the cat-eye look though.
-
@WhiskeySandwich said in We know you love IH, but where do you think we can improve?:
Love my work shirts, but the buttons on all of them frequently slip out and are a bit small to fumble with on the heavier fabrics. I like the cat-eye look though.
Yeah, this is a known issue we are working to improve. We will get there
-
@Alex oh, thanks! I didn’t know if I had missed something. Much appreciated
-
This concerns only the oiled versions of the N1 deck jacket (IHM-37-ODG, IHM-37-BLK).
The armpit material on the inside is the same oiled whipcord as the rest of the jacket. Because this treatment is decreasing breathability, I find it weird that it was used there as the next layer has deliberately the vent holes. At the end of the day, you have two layers of poorly breathing material in the place where you will sweat the most, and the vent holes stop being functional and become more of a decorative ornament.
I propose using unoiled material for that internal part and then external vent holes will have the possibility to work. -
Not sure if this is an issue on the UHF work cuts, but on the western's collar fastening using a very tiny button through a very thick section of fabric is harder to do up than just about any XHS/UHR jeans I've had. At least it is on the 340-OD. I know there's the known issue about work shirt buttons popping out, but I can't even get it fastened on the collar in some cases, especially while wearing. Not a big deal since I only rarely do up the collar but it is nice on chilly mornings.
-
@pechelman I’ve wondered about this many, many times. I never button the top button when I’m wearing a shirt, but I do when I hang them up, because it keeps the collar from getting too squished out of shape in the closet. Those tiny buttons are soooooo hard to fasten.
-
This is probably captured in the 700 or so posts in this thread but coat loops would be appreciated. I have plenty of IH coats (more than I should admit), alas only one, the glorious N1, has a coat loop. A little piece of me dies every time I put the weight of my IH 75 on the hood
-
@popvulture @pechelman I own a very thick 19 oz. chino shirt from Nine Lives and the top button is absolutely impossible to fasten. They stuff the very top of the placket with a thick material which gives it a 0% chance of achieving closure.
All this to say the top button may be more decor than function on these thick fabrics, as annoying as it can be.
-
@Inorganic said in We know you love IH, but where do you think we can improve?:
This is probably captured in the 700 or so posts in this thread but coat loops would be appreciated. I have plenty of IH coats (more than I should admit), alas only one, the glorious N1, has a coat loop. A little piece of me dies every time I put the weight of my IH 75 on the hood
This
-
@weftyarn What do you think of the coat loop I made for the IHJ-08 I sold you
Context for others: Made this coat loop for the IHJ-08 which like many other jackets didn't have a coat loop using a little bit of some waxed cotton laces I had.
-
@pechelman @jordanscollected you don’t see it on a typical pearl snap western shirt, but other than tradition, would there be a reason why it couldn’t be a snap? Could be a structural thing.
-
I absolutely love it, mate @cityofdelusion and the Mrs even more haha! She loves the jacket.
You know what the problem is? None of the other jackets I know has a tag that you can use as a loop to attach a proper loop such as the 08 ️ -
@weftyarn I'm glad it's useful! And I 100% agree regarding the coat loop idea, always wished for IH jackets to have them by default, but as Alex said, Haraki-san does not want them...
Funny enough though, the IHJ-79 (which I own) has a coat loop and if I had to guess, the new Primaloft jacket that Haraki-san is working on might have one too.
-
@popvulture said in We know you love IH, but where do you think we can improve?:
@pechelman @jordanscollected you don’t see it on a typical pearl snap western shirt, but other than tradition, would there be a reason why it couldn’t be a snap? Could be a structural thing.
I'd prefer for it to be a snap personally, but figured there's some reason Haraki-san does it the way he does it with western collars being buttoned vs cpo collars with snaps (i.e. doesnt seem like it's a structural issue to me). Either way, sounds like this may be making its way in 2024?